Avro Canada CF-100 Mk. 5 Canuck
Canada — Twin-engine two-seat all-weather jet fighter


Archive Photos 1


Avro Canada CF-100 Mk.5 Canuck (CAF 100504, c/n 18504) at the Castle Air Museum, Atwater, CA (2/24/2002)

Avro Canada CF-100 Mk.5 Canuck (CAF 100504, c/n 18504) at the Castle Air Museum, Atwater, CA (4/13/2007)

1958 Avro Canada CF-100 Mk.5 Canuck (CAF 100757, c/n 657) at the Canada Aviation Museum, Ottawa, Ontario, Canada (9/17/2003)

Overview 2


The Avro Canada CF-100 Canuck (affectionately known as the "Clunk") was a Canadian jet interceptor/fighter serving during the Cold War both in NATO bases in Europe and as part of NORAD. The CF-100 was the only Canadian-designed fighter to enter mass production, serving primarily with the RCAF/CAF and in small numbers in Belgium. For its day, the CF-100 featured a short takeoff run and high climb rate, making it well suited to its role as an interceptor.

Design and Development 2


In the early 1950s, Canada needed an all-weather interceptor (fighter) able to patrol the vast areas of Canada’s north and operate in all weather conditions. The two-seat fighter crewed by a pilot and navigator was designed with two powerful engines and an advanced radar and fire control system housed in its nose that enabled it to fly in all-weather or night conditions.

Design of the XC-100 to meet a Royal Canadian Air Force (RCAF) specification for an all-weather fighter was initiated at Avro Canada in October 1946. Chief Engineer Edgar Atkin’s work on the CF-100 was subsequently passed to John Frost (formerly of de Havilland) who, along with Avro’s Chief Aerodynamicist Jim Chamberlin, reworked the original fuselage design. The CF-100 Mark 1 prototype (18101) emerged out of the factory, painted gloss black overall with white lightning bolts running down the fuselage and engines. The CF-100 prototype flew its maiden flight on 19 January 1950 with Gloster Aircraft Company Chief Test Pilot Squadron Leader Bill Waterton at the controls. Waterton was on loan from the Gloster firm, another member of the Hawker Siddeley Group, and chosen because of his experience with jet aircraft development, as one of the "highest-time" pilots in the world. The CF-100 Mk.1 was powered by two Avon R.A.3 turbojets with 28.9 kN (2,950 kgp/6,500 lbf) thrust each.

The second prototype (18102) was also powered by Rolls-Royce Avons, although subsequent pre-production and production series aircraft used the Avro Orenda turbojet. Five pre-production Mk.2 test aircraft were produced (18103-18107) all fitted with the Orenda 2 jet engines; one was fitted with dual controls and designated a Mk.2T trainer. The first production version, designated Mk.3, incorporated the APG-33 radar and was armed with eight .50 caliber (12.7 mm) machine guns. The Mk.3CT and Mk.3DT were again dual control versions supplied to operational training units.

A CF-100 arrived at Eglin AFB, Florida, in mid-January 1955 for cold-weather tests in the climatic hangar. A seven-man RCAF team, headed by Flight Lieutenant B. D. Darling, which had previously conducted tests at Namao Air Base, Alberta, were part of the climatic detachment of Central Experimental and Proving Establishment. Tests were to begin in February.

In March 1956, four CF-100 Canucks were sent to Eglin AFB for comparative armament trials, and flown by USAF crews. The operational suitability tests, dubbed Project Banana Belt, were carried out by the 3241st Test Group (Interceptor) of the APGC’s Air Force Operational Test Center, in conjunction with a project team from the Royal Canadian Air Force.

Production 2


In September 1950, the RCAF ordered 124 examples of the CF-100 Mk.3 version, the first of these entering service in 1953. These were armed with eight .50-caliber machine guns. The definitive version rocket-armed CF-100 Mk.4A was based on prototype CF-100 Mk.4 (a modified CF-100 Mk.3) first flying on 11 October 1952. The nose housed the much larger APG-40 radar with wingtip pods each containing up to 29 Mighty Mouse FFAR (folding fin aerial rockets) in addition to the guns. As the last 54 of an order for the CF-100 Mk.3 were changed into the CF-100 Mk.4 in 1954, total orders for the CF-100 Mk.4 rose to 510. The CF-100 Mk.4B version had more powerful Orenda 11s.

Five versions, or "marks", were produced, ending, from 1955 onwards, with the high-altitude CF-100 Mk.5 that featured a 1.06 m (3 ft 6 in) extended wingtip and enlarged tailplane, along with removal of the machine guns. The proposed CF-100 Mk.6 was to have mounted Sparrow II missiles and been powered by afterburning Orenda 11IR engines in an effort to provide an "interim" fighter prior to the introduction of the Avro CF-105 Arrow. A projected transonic swept-wing CF-103 was built in mock-up form in 1951, but was considered obsolescent even before the CF-100’s demonstrated ability to exceed the speed of sound in a dive. On 18 December 1952, S/L Janusz Zurakowski, the Avro company chief development test pilot, took the CF-100 Mk.4 prototype to Mach 1.0 in a dive from 30,000 ft. being the first straight-winged jet aircraft to achieve controlled supersonic flight.

Operational History 2


The Canuck was affectionately known in the RCAF as the "Clunk" because of the noise the front landing gear made as it retracted into its well after takeoff. Its less-attractive nickname was the "Lead Sled", a reference to its heavy controls and general lack of maneuverability, a nickname it shared with a number of other 1950s aircraft. Others included CF-Zero, the Zilch, the Beast, all references to an aircraft many pilots considered less glamorous than RCAF day fighters like the Canadair Sabre.

The aircraft operated under the US/Canadian North American Air Defense Command (NORAD) to protect North American airspace from Soviet intruders such as nuclear-armed bombers. Additionally, as part of the North Atlantic Treaty Organization (NATO), four Canuck squadrons were based in Europe with 1 Air Division from 1956-1962, and were for some time the only NATO fighters capable of operating in zero visibility and poor weather conditions.

When the Korean War started, the USAF was in urgent need of a jet-propelled, all-weather, interdiction/surveillance aircraft. The urgency was so great that the USAF was willing to consider two foreign designs: the CF-100 and the English Electric Canberra. The CF-100 was rejected because of insufficient range and payload. The English Electric design was selected and developed into the B-57 Canberra.

The CF-100 served with nine RCAF squadrons at its peak in the mid-1950s. Four of these squadrons were deployed to Europe from late 1956-1962 under the NIMBLE BAT ferry program, replacing some NATO RCAF squadrons equipped with Canadair Sabre day fighters to provide all-weather defense against Soviet intruders. Canucks flying at home retained natural metal finish, but those flying overseas were given a British-style disruptive camouflage scheme - dark sea gray and green on top, light sea gray on the bottom.

During his Avro Canada years, the Chief Development Pilot, S/L Zurakowski, continued to fly as an aerobatic display pilot, with spectacular results, especially at the 1955 Farnborough Airshow where he displayed the CF-100 in a "falling-leaf." He was acclaimed again as the "Great Zura" by many aviation and industry observers who could not believe a large, all-weather fighter could be put through its paces so spectacularly. His performance led to Belgium purchasing the CF-100.

In its lifetime, 692 CF-100s of different variants were produced, including 53 aircraft delivered to the Belgian Air Force. Although originally designed for only 2,000 hours, it was found that the Canuck’s airframe could serve for over 20,000 hours before retirement. Consequently, though it was replaced in its front line role by the McDonnell CF-101 Voodoo, the Canuck served with 414 Squadron of the Canadian Forces at CFB North Bay, Ontario, until 1981, in reconnaissance, training and electronic warfare roles. After the CF-100 was retired, a number of aircraft still remain across Canada (and elsewhere) as static displays.

Its planned successor, the CF-105 Arrow along with the sophisticated Orenda Iroquois engine, both Canadian-designed, were canceled in 1959 in a controversial decision by the Canadian government.

Variants 2


Operators 2


Specifications (Avro CF-100 Canuck) 3,4


Type 4

Wings 4

Fuselage 4

Tail Unit 4

Landing Gear 4

Accommodation 4

Dimensions, Weights and Performances 3

 Mk.1Mk.2Mk.3Mk.4Mk.5
Crew:2 (pilot and navigator)
Span:52 ft 0 in52 ft 0 in52 ft 0 in
57 ft 6 in with tip tanks
49 ft 11 in
53 ft 7 in with rocket pods
53 ft 7 in
60 ft 10 in with rocket pods
Length:52 ft 6 in52 ft 3 in52 ft 3 in54 ft 2 in54 ft 2 in
Height:14 ft 6 in14 ft 6 in14 ft 6 in14 ft 6 in14 ft 6 in
Wing area:540 ft²540 ft²540 ft²540 ft²591 ft²
Tare weight:19,185 lb24,408 lb23,100 lb
All-up weight:31,877 lb33,100 lb34,000 lb35,500 lb (Mk.4B)33,528 lb
Powerplants:2 × 5,700 lb st Rolls-Royce Avon RA.22 × 6,000 lb st Avro Canada Orenda 12 × 6,000 lb st Avro Canada Orenda 8
(Mk.3 and Mk.3B)
2 × 6,300 lb st Avro Canada Orenda 9
(Mk.4A)
2 × 7,300 lb st Avro Canada Orenda 11
(Mk.4B)
2 × 7,300 lb st Avro Canada Orenda 11
Maximum speed:550 mph at 40,000 ft600 mph at 10,000 ft560 mph at 30,000 ft
Initial climb rate:9,800 ft/min8,000 ft/min8,750 ft/min
Combat ceiling:45,000 ft
Range:2000 miles
Armament:8 × 0.5-in guns in ventral tray
(Mk.3, 3B, and some Mk.3T trainers)
0.5-in (12.7 mm) machine guns and 2.75-in Mighty Mouse rockets, 48 in a ventral pack and 58 in wingtip pods.2 wingtip pods of 29 × 70-mm (2.75 in) "Mighty Mouse" fin-folding aerial rockets.
Two modified Mk.5s used for Sparrow II air-to-surface missile research for Avro CF-105 Arrow

References



search Skytamer.com

Skytamer Images (Skytamer.com)
Est. 1998